Move to the text

One in screw diagnosis result

The screw which turns off a watch and "the battery presser bar" in the watch

2020-08-05
Materials Is it iron?
Screw shape
0.8 millimeters (0.20 millimeters of pace) 
The head shape Hiller head minus
Dimensions
The screw diameter both 0.8 millimeters (0.2 millimeters)
One screw length is 1.2 millimeters of screw parts with a shoulder screw 2 millimeters one more 
Use
The screw which turns off a watch and the battery presser bar in the watch 
Remarks
Square nut (TN-00005) of M0.8 in screw outer diameter 0.77 miriguraide us
As I went when I put this, I judged it to be a screw of M0.8.
 
As it was the screw which stopped a board, head diameter was to be important, too.
 
As I have the budget, I stop the production and suggest an imitation from we stocks
There were 0.8x2 of the cross hole 00th of 1.8 millimeters of head diameter and 0.8x2.1 of the cross hole zeroth.
I had you choose 0.8x2.1(TE-00088) of the cross hole zeroth.
When head diameter did not match, I seemed to do something with a washer.

Mt. MTB aluminum inch screw UNF1/4-28 pan head

2020-07-17
Materials Aluminum
Screw shape
Inch screw UNF 1/4-28 mountain (0.90 millimeters of pace) narrowed eyes screw
The head shape 3.25 millimeters of special pan hexagon hole 12.75 millimeters rustic buntings
Dimensions
Screw diameter UNF 1/4-28 mountain narrowed eyes pace 28 mountain/inch (0.90 millimeters)
Screw 5.5 millimeters in length 
Use
MTB front suspension use 
Remarks
A hexagon hole transforms a lot of disassembly frequency by maintenance and seems to want to grow it.
Aluminum → It was an inquiry of the production right or wrong with the stainless steel.
 
What kind of implication would it have that there was a through-bore in the center?
Scupper kitokadeshoka.
 
As I could cope on the strength side of the thing which I could produce in the same way or was anxious
After having had user understand confirmation,
Other than stainless steel, I examined even titanium, aluminum.

1.4 mirihira head for the G-Shock GA2000 camera back

2020-06-17
Materials SUS
Screw shape
1.4 millimeters of pace 0.45 millimeters tapping B types
The head shape There is R slightly, and are 0.7 millimeters of 4 millimeters of the zeroth special Hiller head diameter rustic buntings mortar pans?
Dimensions
0.45 millimeters of 1.4 millimeters of screw diameter B type pace
Screw 6 millimeters in length 
Use
As a Casio G-Shock GA2000 camera back stopping screw customization
Remarks
It was an inquiry of the production right or wrong with titanium.
The item on display plus (it was), but is (-) as there seemed to be (-) in an aspect early on a deadline
I suggested it.
 
As there are not a tapping screw, the results with titanium, it is honest uneasiness.
I can mold the mountain corner similar to SUS, or how is the duty (the anti-slack) as the screw?
In examining the cost as it takes it.

2 millimeters of Sarah heads for the Mamiya camera

2020-06-11
Materials Iron
Screw shape
0.4 millimeters of 2 millimeters of pace small screw
The head shape 3 millimeters of the zeroth one kind Sarah head diameter
Dimensions
2 millimeters of screw diameter
Screw 12 millimeters in length (as Sarah full length) 
Screw around 2 millimeters in length
Use I am used by the connection part of a camera body and the lens
Remarks
It was not in us
As a head was standardized goods, arrangement was possible by order.
I was consulted whether there was slightly long 15 millimeters in total.
In being different in materials, and this place being stock in us, and having you look at the sample.

0.6 millimeters for the watch camera back? 0.7 millimeters?

2020-06-05
Materials Stainless steel
Screw shape
0.15 millimeters of 0.6 millimeters of pace or
0.175 millimeters of 0.7 millimeters of pace
The head shape * Sarah - head diameter 1.25 
Dimensions
Screw diameter 
If judge it from pace; of 0.6 millimeters
Was a screw, but outer diameter is big for 0.6 millimeters when measure; 0.7 millimeters?
Screw around 2 millimeters in length
Use Watch camera back stopping screw
Remarks
The thread becomes round, too
That it is 0.6 millimeters being 0.7 millimeters or either
Because do not become clear, to user
I will have you try both.

Matsumoto Sangyo of the screw
〒270-1137
1380-5, Okahotto, Abiko-shi, Chiba
TEL.04-7182-4490
FAX.04-7182-2382

――――――――――――――――

<< the handling product >>
●Small screw
(millimeters/inch UNC UNF)
●Microscrew miniature screw
●Slack setscrew "nojirokku" 
●The slack prevention processing (adhesive system, application system)
●Tapping screw
●Rivet  ●Pin
Custom screw custom tailoring screw
●Screw for the animal experiment
●Metal parts

――――――――――――――――
I take the tour of the plant
How do you make the screw?
Of this
How do the materials say?

Please refer.

TEL 04-7182-4490

――――――――――――――――
It is the verge of the inquiry
Even if it is not the drawing of the screw 
Even a handwritten painting is OK.
I do not have any problem if I understand an image.
FAX 04-7182-2382
 

 

 

0
0
0
5
9
2
Back to TOP