Move to the text

Company profile

Mark design concept

The constitution of a big equilateral triangle to lay a center of gravity well on the earth, and to soar and the small equilateral triangle to assume a screw (fastener) a symbol. By the combination of equilateral triangles of big things and small things, I express the sensitivity that is precision, delicacy, the acute angle of the Matsumoto Sangyo product.
[concept of each part]
●Using an equilateral triangle, I express the precision of geometric precision = product of the equilateral triangle. ●I express "M" of Matsumoto Sangyo by repeating two equilateral triangles. ●Because an equilateral triangle (the small) gets into the equilateral triangle (very much), I express the abstract use of the screw (fastener) which is Matsumoto Sangyo product.
I make use of the cause of this mark, the actual voice of the visitor continuously and pray when I aim at the product meeting the needs of the visitor and want to help it by productivity improvement and the environment improvement of the visitor. Therefore I hope that I have continuously more instruction, support as we will continue providing a reliable product and careful technique, service.

Company profile

■Company name/Matsumoto Sangyo
■Representative/Shinsuke Matsumoto
■Head office/〒270-1154 1-22-6, Hakusan, Abiko-shi, Chiba TEL: 04-7182-3060 FAX: 04-7183-1768
■Factory/〒270-1137 1380-5, Okahotto, Abiko-shi, Chiba TEL: 04-7182-4490 FAX: 04-7182-2382
■Founding date/December 26, 1968
■Capital/10 million yen
■Handling product/
・Miniature screw (#00 screw)
・Microscrew camera screw (small screw for the #0 precision instrument)
・Small screw self-tapping screw, slack stopping screw "nojirokku"
・Screw for glasses
・Rivet pin
・Screw for the animal experiment
・Study use (special materials) screw
・Tool for the conclusion
■Use materials/
Iron, brass, stainless steel aluminum titanium, copper
■Production size/Screw diameter: 0.5-4.0 millimeters of necks lower L size: ... 30 millimeters
■Monthly amount of production/250 million
■Number of employees/17 people
■Banker/
Chiba Bank Abiko Branch Chiba Kogyo Bank Abiko Branch JOYO BANK Abiko Branch 
■Main delivery/
The Tokyo tack and Sankyo SANKO industry orippu 
Yamaichi delicate work Takashima high male wound sum bosado
Nabeya Bi-Tech
Medical system pharmacy system university, research institute
Overseas (export destination) Hong Kong, China Taiwanese Thai Malaysian American France 
■Main supplier/
Line place made of line O&K Yamamoto made of Sugita 
Metal one steel product sale good upstart genus sanetsu Corporation
Inui industry Yamazaki delicate work Emma NAC East Japan 
Chikuma

Company history

■December, 1968 /I establish a company at 1-22-6, Hakusan, Abiko-shi, Chiba
■August, 1970 /It is the start of production of the no factory construction plus small screw 132 in in front of Okahotto, Abiko-shi, Chiba waterfall 1380
■July, 1973 /I introduce one 528 square meters of factory enlargement high speed headers (product made by Nakashimada Engineering Works) with demand increase
■May, 1974 / High-speed header (product made by Nakashimada Engineering Works) four introduction
■November, 1979 /Furthermore, 600 square meters enlarge a building to deal with demand increase and equip 14 high-speed headers (product made in Nakajima ironworks) with an automatic checker and it is unmanned by night and starts driving
■October, 1980 /Perfection of the mass production system of the camera screw (small screw for the #0 precision instrument)
■September, 1982 /2 die 3 blow PF630S (product made by Nakashimada Engineering Works) introduction
■November, 1982 /The materials warehouse 260 square meters enlargement
■August, 1983 /Perfection of the mass production system of the triangle screw
■September, 1983 /I introduce an office computer (re-com 3000) for rationalization of an order, production, the inventory control office work
■November, 1984 /All quantity sorter (product made in at day) one introduction
■March, 1985 /High-speed header (product made by Nakashimada Engineering Works) three introduction
■March, 1987 /High-speed rolling (product made by Kyoei Seisakusho) three introduction
■October, 1990 /High-speed header 2 die 4 blow (product made in Nakajima ironworks) introduction
■April, 1994 /The factory 825 square meters (250 tsubos) enlargement is unmanned and is strengthened the driving in the adjoining land
■July, 1994 /High-speed header (product made by Itami Machine Works) two introduction
■August, 1994 /High-speed header (product made by Nakashimada Engineering Works) one introduction
■December, 1995 /High-speed header (product made in Nakajima ironworks) two introduction High-speed rolling (horizontal model) (product made by Kyoei Seisakusho) one introduction
■January, 1996 /One boxing machine (product made in Sasaki package) introduction 200 square meters of storage of stock place enlargement
■February, 1996 /The slack stopping screw "Noji lock" production right acquisition
■March, 1997 /High-speed header (product made by Nakashimada Engineering Works) three introduction
■June, 1997 /High-speed rolling (horizontal model) (product made by Kyoei Seisakusho) one introduction
■October, 1997 /Screw start of production for the clock
■June, 1999 / High-speed header (product made by Nakashimada Engineering Works) three introduction
■December, 1999 / High-speed rolling (product made by Kyoei Seisakusho) two introduction
■January, 2000 /One boxing machine (product made in Ishida) introduction
■April, 2000 /I establish local corporation AC TEGA (ASIA) LIMITED in slack stopping screw "Noji lock" dealership acquisition Hong Kong
■November, 2000 /"Noji lock" for glasses start of production
■December, 2000 /It becomes materials warehouse 150 square meters enlargement, high-speed header (product made by Nakashimada Engineering Works) three introduction 52 in total
■March, 2001 /It becomes vertical conveyer (I throw away a spear and produce it) 15 introduction 43 in total.
■June, 2001 /It becomes high-speed rolling (horizontal model SR-OH/LF type) (product made by Kyoei Seisakusho) one introduction four in total
■February, 2002 /It becomes high-speed rolling (horizontal model SR-OH/LF type) (product made by Kyoei Seisakusho) one introduction five in total
■April, 2002 /Screw diameter 0.5mm rivet trial manufacture start, homepage establishment
■June, 2002 /It becomes vertical conveyer (I throw away a spear and produce it) four introduction 47 in total
■July, 2002 /It becomes high-speed rolling (SR-0H/LH type) (product made by Kyoei Seisakusho) one introduction six for screw diameter 0.5mm in total
■August, 2003 /I renewed a homepage
■August, 2003 /Start of production of the super microscrew
■April, 2004 /It is start of production Noji lock 1.6
■April, 2004 /Noji drive start of production
■October, 2004 /"ramirokku" for glasses start of production
■December, 2005 /"Pita lock" for glasses start of production
■January, 2007 /It becomes high-speed header (product made by Nakashimada Engineering Works) three introduction 55 in total.
■September, 2008 /Image sorter one introduction. With introduction, I establish the inspection, sorting room.
■September, 2009 /It becomes image sorter one introduction two for the precision screw in total.
■October, 2011 /IOFT2011 exhibition (Tokyo Big Sight)
■November, 2011 /Net shop (mail order) start
■January, 2012 /2012 CES exhibition (Las Vegas)

Traffic access to a factory

[when you come by car] You advance to oak, the Chiba area if you leave Joban Expressway oak IC, and be over a grade separation with National highway No. 6
 Please turn left at the "Sakuradai" of 2km ahead intersection. I appear at the intersection of the Lake Tega crossing bridge when I advance to the way.
 You go straight on at an intersection, and please advance to the mark in approximately 4km Gohonmatsu Park.
[when you come by a train] The nearest station becomes JR Joban Line Tennodai Station.
_________________________________________

Matsumoto Sangyo of the screw
〒270-1137
1380-5, Okahotto, Abiko-shi, Chiba
TEL.04-7182-4490
FAX.04-7182-2382

――――――――――――――――

<< the handling product >>
●Small screw
(millimeters/inch UNC UNF)
●Microscrew miniature screw
●Slack setscrew "nojirokku" 
●The slack prevention processing (adhesive system, application system)
●Tapping screw
●Rivet  ●Pin
Custom screw custom tailoring screw
●Screw for the animal experiment
●Metal parts

――――――――――――――――
I take the tour of the plant
How do you make the screw?
Of this
How do the materials say?

Please refer.

TEL 04-7182-4490

――――――――――――――――
It is the verge of the inquiry
Even if it is not the drawing of the screw 
Even a handwritten painting is OK.
I do not have any problem if I understand an image.
FAX 04-7182-2382
 

 

 

0
0
0
5
6
4
Back to TOP